beautypg.com

Dvr networking guide, Now you can see – SVAT Electronics CLEARVU3 User Manual

Page 28

background image

SVAT ELECTRONICS

now you can see

CLEARVU3

23

7.DVR NETWORKING GUIDE

7.1 Introduction

Congratulations on taking a step forward in protecting your valued possessions. Now that

you have your video security system in place, connecting it to the internet will allow you to

view what’s important to you with ease. You will learn about your product and will see that

you can do this on your own. The following is a step by step instruction manual on how to

connect your system to the internet. You will be able to view your DVR and even watch

previously recorded footage with the touch of a button.

NOTE: This guide was created using a cable modem and some procedures will be slightly
different depending on your hardware. If you are using a DSL modem, you may need to
enter your PPPoE settings into the DVR (User name and password provided by your ISP.)
For more information refer to section 9.2 of the user manual.

Before you start lets make sure that you have everything you need to do this properly. You

should have these ready and connected before beginning:

DVR connected to a router

Router connected to the internet. In order for this DVR system to connect to

the internet, it must be connected to a router. If you are using a DSL internet
connection the setup process is much easier if you use modem with a router

integrated in it as this will help avoid any problems connecting your DVR. Please
write down the model # of your router in the important information section.

A PC laptop or computer that is connected to the router so you can make the

necessary changes. This system is not Mac compatible. Your computer should

have the following specifications:

Internet Explorer Version 5 or higher. If you do not have this program,

please go to

www.download.com and get an updated version. You can check

your version of Internet Explorer by opening the program. Go to the top menu
selection and in the Help menu options, choose About Internet Explorer. The
version will be displayed.

A valid and fully updated version of Windows XP (minimum).

Important Information

Please fill in the information you receive during this installation in the areas below:

Your router manufacturer:

Example: D-Link

Your router model #:

Example: DI-524

Router IP:

Example: 192.168.1.1

DVR IP:

Port #: ______

Example: 192.168.1.101

Example: 80

External IP:

Example: 14.14.243.113

DynDNS Username:

Example: myname1234

DynDNS Password:

Example: 123ABC

DynDNS Domain Chosen:

Example: dyndns.org

Sign-In URL:

Example:

myname1234.

dyndns.org