SVAT Electronics CLEARVU3 - Manual (Page 34)

SVAT ELECTRONICS now you can see
CLEARVU3 29
7.6 Forwarding Outside Your Network.
Port Dynamic DNS
This section will explain how to associate your IP address with an easy-to-remember URL
(domain name)
1. Open Internet Explorer and type in
www.dyndns.com
2. The instructions on creating a dynamic DNS may have changed since the writing of this
guide. Create a new account by clicking the link “Create Account”
3. Enter your preferred user name, email address, and password.
4. Do not worry about the optional information. Agree to the Terms of Service by checking
the boxes. Click Create Account.
2. Press ENTER, and your DVR’s login window should pop up. If it does not pop up, your
router is not properly forwarding the necessary port. This could be due to a number of
problems including incorrect settings, presence of a firewall, or a DSL modem that has
its own IP address.
If your DSL modem has its own internal IP address, it will not properly forward the
necessary port. You may have to configure PPPoE settings in the DVR to match the
settings provided to you by your Internet Service Provider (ISP). Consult your ISP for
more information. SVAT technical support cannot troubleshoot modems, since changing
these settings can potentially render your modem inoperable.
See section 9.2 Advanced Network Setup for PPPoE configuration instructions.
You should also check all your network connections and go through the above steps
again to make sure a configuration error was not made.