Savin SLP 38c SLP38C User Manual

Page 44

Windows NT 4.0 Configuration

Select a printer you want to use.

TCP/IP

A Click the printer you want to use, and then click [OK].

Note

❒ Printers that respond to an IP broadcast from the computer will be dis-

played. To print to a printer not listed here, click [Specify Address], and
then type the IP address or host name.

❒ You cannot add an address partially similar to that already used. For ex-

ample, when “192.168.0.2” is already used, “192.168.0.2xx” cannot be
used. Similarly, when “192.168.0.20” is already used, “192.168.0.2” can-
not be used.

NetBEUI

A Click [NetBEUI].

A list of printers that can be used by the NetBEUI protocol appears.

B Click the printer you want to use, and then click [OK].

Note

❒ Printers that respond to an broadcast from the computer will be dis-

played. To print to a printer not listed here, click [Specify Address], and
then type the NetBEUI address. Confirm the NetBEUI address on the
network configuration page. For more information about the printing of
configuration page, see “Printing a Configuration Page” in Administrator
Reference 2 included as a PDF file on the CD-ROM.

❒ You cannot print to printers beyond routers.

IPP

A Click [IPP].

The IPP settings dialog box appears.

B In [Printer URL], type “http://(printer's IP address)/printer” as the printer's

IP address.
(Example IP address is 192.168.15.16)

http://192.168.15.16/printer

C As necessary, type the names to distinguish the printer in [IPP Port Name].

Type a name differing from those of any existing port names.
If you omit this, the address typed in [Printer URL] will be set as the IPP port
name.