Sharp AR-FX12 User Manual
Page 83
PROBLEMS AND SOLUTIONS
7-5
7
Printing does not take
place after reception.
Does a message appear in the
display instructing you to add toner
or paper? (Printing is not possible.)
Restore printing capability
as instructed by the display
message. Printing will begin.
A received image
prints out blank.
Was the wrong side of the original
scanned in the transmitting machine?
Check with the operator of
the transmitting machine.
_
The received image
is faint.
Is the original faint?
Ask the other party to re-
send the document using a
suitable exposure setting.
_
The received image
is distorted.
Were line conditions poor due to
thunder or another reason?
Ask the other party to send
the document again.
_
White or black lines
appear in the
transmitted image.
Is the document glass dirty?
Clean the document glass . Operation manual (for
general information and
copier operation), page 6-2.
A dial tone is not heard
through the speaker.
Is the volume set to "low"?
Set the speaker volume to
"medium" or "high".
page 8-6.
A ringing sound is not
made.
Has the ringer volume been turned
off?
Set the ringer volume to
"low", "medium", or "high".
page 8-6.
Problem
Check
Solution
Page