Sharp AR-FX12 - Manual (Page 76)

PROGRAMMING, EDITING, AND DELETING F-CODE MEMORY BOXES
6-12
SETTING FOR F-CODE CONFIDENTIAL TRANSMISSION
MEMORY BOXES (PRINT PIN)
Program the print PIN (Personal Identification Number) that is used to print a document that has been received to
an F-code confidential memory box. For information on using a print PIN, refer to "PRINTING A DOCUMENT
RECEIVED TO AN F-CODE CONFIDENTIAL MEMORY BOX" on page 4-7.
1 Touch the [CONFIDENTIAL] key in step 3
of "PROGRAMMING AN F-CODE MEMORY
BOX" on pages 6-10 to 6-11 and store a
box name, sub-address, and passcode.
2 Touch the [PRINT PIN] key.
3 Use the numeric keys to enter a 4-digit
number.
If you make a mistake, press the [C] key. All digits will
be cleared, so you will need to re-enter the number
from the first digit.
To cancel entry of the print PIN, touch the [CANCEL]
key. You will return to the screen of step 2 without
programming a print PIN.
4 Touch the [OK] key.
You will return to screen of step 2 and the entered
print PIN will appear.
5 To exit, touch the [EXIT] key.
To program another memory box, touch
the [NEXT] key.
Touching the [EXIT] key
returns you to the screen
of step 3 on page 6-10.
Touching the [NEXT]
key returns you to the
screen for programming
a new memory box (the
screen of step 4 on page 6-10).
NOTES
Program a 4-digit number for the print PIN. The characters " " and "#" cannot be used.
The print PIN can not be omitted.
Take care not to forget the print PIN that you have programmed. If you forget the passcode, consult your Sharp
dealer.
SUB ADDRESS
BOX NAME FAX INFORMATION
55112233/481221
PRINT PIN
F-CODE MEMORY BOX / CONFIDENTIAL
PRINT PIN
ENTER THE PRINT PIN VIA THE 10-KEY PAD,THEN PRESS [OK].
No.003
EXIT
OK CANCEL
NEXT
EXIT NEXT