Sharp AR-FX12 - Manual (Page 6)

0-4
TO USE THIS PRODUCT CORRECTLY AS
A FACSIMILE
Several points must be kept in mind when using this product as a facsimile.
Please note the following:
Line connection
Use the telephone cable supplied to connect
the machine to a telephone line. Insert the end
of the line cord with the core into the LINE
socket on the machine as shown. Insert the
other end into the telephone line socket.
In some countries, an adapter is required to
connect the telephone line cable to the wall
telephone socket, as shown in the illustration.
Fax power switch
When using the machine, be sure to keep the fax power
switch turned on at all times. The fax power switch must be
turned on to receive faxes at night or send timer transmission
faxes at night.
Setting the date and time and programming
your sender's name and number
Before using the fax function, you must set the date and time
and program your sender's name and number in the machine.
This procedure is explained in "POINTS TO CHECK AND PROGRAM AFTER INSTALLATION" on page 1-2 of
this manual.
Lithium battery
A lithium battery inside the machine keeps key operator program settings for the fax function in memory.
When the battery dies, key operator program settings will be lost. Be sure to keep a written record of the key
operator program settings.
The life of the lithium battery is approximately 5 years if the machine power switch and fax power switch are
kept continually off.
Other information
If a thunderstorm occurs, we recommend that you unplug the power cord from the power outlet. Information
will be retained in memory even if the power cord is unplugged.
Core
Line socket
Adapter
Wall socket
For Australia
For New Zealand
For United
Kingdom
ON
OFF
Fax power switch