B.1.3 absolute maximum ratings, B.1.4 normal operating ranges, B.2 reliability – Sun Microsystems SUN NETRA CP3000 User Manual
Page 62: B.1.3, Absolute maximum ratings, B.1.4, Normal operating ranges, Reliability
B-4
Sun Netra CP3000 Advanced Mezzanine Card PCIe Hard Drive and SAS Controller User’s Guide • March 2010
B.1.3
Absolute Maximum Ratings
The following values are stress ratings only. Do not operate at these maximums. See
Section B.1.4, “Normal Operating Ranges” on page B-4
for normal operating
conditions.
B.1.4
Normal Operating Ranges
*The MTBF will be significantly reduced if operated above 30˚C for more than 96 consecutive hours.
B.2
Reliability
Reliability prediction was done using Telcordia document SR-332, Issue 1. The
prediction assumed 25˚ Celsius operating temperature with 100 percent duty cycle,
in a ground-benign, controlled environment.
■
MTBF: 630,000 hours
■
One year limited warranty
Payload voltage, +12V
0 VDC to +13.2 VDC
Management voltage, +3.3V
3.135 VDC to +3.465
VDC
Storage temperature
–40 to +70˚ Celsius
Noncondensing relative humidity
5% to 95% at 29˚ Celsius
Description
Range
Nominal operating voltage
+10.8 to +13.2 VDC payload power
3.135 VDC to +3.465 VDC management
power
Operating temperatures*:
• 60m below sea level up to 1800m above sea
level
• from 1800m up to 4000m above sea level
–5˚ to +55˚C
–5˚ to +40˚C
Operating humidity
Less than 85% at 29˚C
Idle power consumption (without links)
9W
Maximum power consumption
12W