Sun Microsystems SUN NETRA CP3000 - Manual (Page 43)

Chapter 3 Managing the AMC 3-3
Get Device SDR 29.3 S/E 21h Mandatory
Reserve Device SDR
Repository
29.4 S/E 22h Mandatory
Get Sensor Reading Factors 29.5 S/E 23h Optional
Set Sensor Hysteresis 29.6 S/E 24h Optional
Get Sensor Hysteresis 29.7 S/E 25h Optional
Set Sensor Threshold 29.8 S/E 26h Optional
Get Sensor Threshold 29.9 S/E 27h Optional
Set Sensor Event Enable 29.10 S/E 28h Optional
Get Sensor Event Enable 29.11 S/E 29h Optional
Rearm Sensor Events 29.12 S/E 2Ah Optional
Get Sensor Event Status 29.13 S/E 2Bh Optional
Get Sensor Reading 29.14 S/E 2Dh Mandatory
FRU Device Commands
Get FRU Inventory Area Info 28.1 Storage 10h Mandatory
Read FRU Data 28.2 Storage 11h Mandatory
Write FRU Data 28.3 Storage 12h Mandatory
AdvancedTCA™ Commands
Get PICMG Properties 3-9 PICMG 00h Mandatory
FRU Control 3-22 PICMG 04h Mandatory
Get FRU LED Properties 3-24 PICMG 05h Mandatory
Get LED Color Capabilities 3-25 PICMG 06h Mandatory
Set FRU LED State 3-26 PICMG 07h Mandatory
Get FRU LED State 3-27 PICMG 08h Mandatory
Get Device Locator Record
ID
3-29 PICMG 0Dh Mandatory
AMC® Commands
Set AMC Port State 3-27 PICMG 19h Mandatory
Get AMC Port State 3-28 PICMG 1Ah Mandatory
TABLE 3-1 Supported IPMI Commands (Continued)