beautypg.com

Siemens C2-010 User Manual

Page 33

background image

ADSL2+ Router User’s Guide

5-7

Filter

Settings

Description

Src IP
Address

Select Any IP, Single IP, or IP Range from the drop-down menu and then enter the
appropriate IP address or addresses that will be the source of packets this filter will act
upon.

Dest IP
Address

Select Any IP, Single IP, or IP Range from the drop-down menu and then enter the
appropriate IP address or addresses that will be the destination of packets this filter will act
upon.

Source
Port

Select Any Port, Single Port, Port Range, or Safe Range. A port or range of ports that will be
used to connect to the Source IP address or addresses entered above. If Any Port is
entered, all ports in this IP range will be acted upon by this filter.

Dest Port

Select Any Port, Single Port, Port Range, or Safe Range. A port or range of ports that will be
used to connect to the Destination IP address or addresses entered above. If Any Port is
entered, all ports in this IP range will be acted upon by this filter.

Protocol

The protocol associated with this IP filter. The user may choose between TCP, UDP or
TCP;UDP
.

Action

Select between Allow or Deny. Allow will instruct the filter to allow packets that meet the
criteria entered above to cross the router, while Deny will instruct the router to drop any
packets that meet the above criteria. It should be noted the Allow will create a much more
restrictive filter than the Deny setting.