Siemens C2-010 - Manual (Page 29)

ADSL2+ Router User’s Guide
5-3
5.2 Virtual Server Configuration
To view the following window, click on the Advanced tab at the top of the window and then click the Virtual
Server button to the left. The Virtual Server will allow remote users access to various services outside of
their LAN through a public IP address, such as FTP (File Transfer Protocol) or HTTPS (Secure Web). After
configuring the Router for these features, the Router will redirect these external services to an appropriate
server on the user’s LAN.
These external services may be modified by clicking its corresponding edit icon, or they may be deleted by
clicking the corresponding delete icon. Though there are seven fields available to configure the Virtual
Server, in most cases, only the IP address of the Virtual Server will be needed for implementation. To enable
an already existing Virtual Server, click its corresponding edit button, configure the appropriate fields listed
below and set the Status fields to Enabled by clicking the radio button. To configure other virtual servers for
the Router, configure the following fields and click Apply.
Figure 5-3. Virtual Server Menu and List
Virtual
Server
Settings
Description
Private IP Enter the IP address of the Virtual Server.
Protocol The protocol type used for the Virtual Server. The user may select TCP, UDP or Both,
depending on the type of Virtual Server implemented.
Enter the port number of the Virtual Server’s computer. Existing Virtual Servers listed
already have their well-known port number listed yet this may need to be changed in certain
circumstances.
Local Port Enter the port number of the Virtual Server’s computer. Existing Virtual Servers listed
already have their well-known port number listed yet this may need to be changed in certain