25 quick setup, Vmg optimizing (racing) – Simrad AP25 User Manual
Page 61

Operation
20221495F
59
WIND Auto 
This line will only appear if the autopilot has been set up for 
racing in the installation menu (page 106). See page 51 for 
information about the RACING parameters. 
User setup2 
The User setup 2 contains the Set shallow water 
alarm and the Contrast setting. Refer to User setup 2 
for STANDBY mode. 
2.25 Quick Setup
Quick Setup gives easy access to the racing 
parameters provided the Wind setup has been set to 
RACING in the Installation/Dockside menu (see 
page 106). 
The Quick setup menu is activated by a quick double 
press on the NAV/WIND button. 
Step through the menu by using the PORT or STBD 
button. Select by rotating the course knob. A filled 
square = On. 
VMG optimizing (RACING)
The VMG (to wind) parameter can only be enabled or disabled 
when ‘Wind setup’ is set to ‘RACING’. It is disabled in the 
‘NORMAL’ sub-mode. 
When enabled, the VMG optimizing will be active for 5 – 10 
minutes after a new wind angle has been set. It will only be 
activated when beating. 
‘VMG’ will be displayed in the upper left corner under the mode 
index when the VMG optimizing feature is active. 
Range: Enabled/Disabled 
Default: Disabled 
