SpectraLink h340 - Manual (Page 40)

SpectraLink Corporation Configuration and Administration—NetLink e340/h340/i640 Wireless Telephone
with SIP
PN: 72-1089-02-D.doc Page 40
Softkeys
Softkey Name Displayed during… Press to…
<< Cursor backward Entering a dial number. Move the cursor back one position.
>> Cursor forward Entering a dial number. Move the cursor forward in
alphanumeric node, if the cursor is
at the end of the line, adds a space
character.
Answ Answer Incoming call on the selected line. Answer the call (equivalent to Start
Call key).
Dele Delete previous Entering a dial number. Delete the character prior to the
cursor position.
Dial Dial Call A dial number is being entered on
the selected line.
Initiate a phone call to the entered
dial number.
End End Call An active call on the selected line. Terminate the call without going
back to standby mode.
Fwd Forward Definition Prior to entering the first character
of a dial number.
Delete a previously defined forward
destination.
Or initiate definition of a new
forward destination.
Hold Hold In an active call. Place the call on hold. The line
status shows x when the call is on
hold or * when audio is flowing.
Msg Message Initial dial screen when new line is
selected and a dial tone is active
prior to entering first character of
the number to be dialed 7 .
Initiate a call to the specified
message center contact address for
retrieval or administration of
voicemail.
Mute Toggle muting In an active call. Toggle audio transmission to the far
end. The line status shows * when
not muted or x when muted.
OK OK Power up registration if username is
not configured in admin menu.
Send the username and password to
the SIP server for authorization to
register the handset.
ReDl Redial Prior to entering the first character
of a dial number.
Redial the last number that was
dialed.
Rej Reject Incoming call on the selected line. Reject the incoming call. The SIP
server will then redirect the call
elsewhere..
Rsme Resume In an active call and you have
placed the call on hold.
Resume a call that was previously
placed on hold or that went on hold
when another line was activated.
Save Save Entering a dial number as a forward
destination.
Save the dial number as the
forwarding destination for the
selected line.
7 Appears only if the PROXYn_MAIL_NOTIFY is configured. A message center contact address must be
defined for the proxy used by the selected line.