SpectraLink h340 - Manual (Page 14)

SpectraLink Corporation Configuration and Administration—NetLink e340/h340/i640 Wireless Telephone
with SIP
PN: 72-1089-02-D.doc Page 14
2.10 Handset Displays
Status display area
Displays handset information and available softkeys for the currently selected line.
Text may be truncated if there are more than 18 characters because the handset
display area is 18 characters wide.
LINE display
Pressing the LINE key from the active mode displays a list of line appearances as
programmed in the SIP TFTP configuration file. The line appearances are mapped
to corresponding line icons. The LINE key can be pressed while the handset is in the
standby mode to activate the handset.
The currently selected line is indicated by an asterisk (
* ). Lines for which the
corresponding proxy server has outstanding new mail are flagged with plus ( + )
characters. Exit the LINE display by pressing a line number key or by pressing the
End Call key. The LINE display may be used during a call to examine the status of
other lines while you are participating in a voice call on another line. If the Rsme
(resume) softkey is pressed to activate a call on a newly selected line, any previous
active call is placed on hold status.
FCN display
Pressing the FCN key from the active mode displays a list of telephony options
available to the user. Included here are transfer and do-not-disturb functions.
MENU display
Pressing the MENU key from the active mode displays options available for the
operating mode of the handset. The currently available options set the data entry
mode during dialing (and during entry of a forwarding number) to either numeric
only or alphanumeric mode.