SpectraLink h340 - Manual (Page 37)

SpectraLink Corporation Configuration and Administration—NetLink e340/h340/i640 Wireless Telephone
with SIP
PN: 72-1089-02-D.doc Page 37
Press the Start Call key or the Answ softkey to answer the call. Press Rej to reject the
call and allow the SIP server to redirect the call elsewhere, usually to voicemail.
When the call is answered an asterisk (
* ) displays at the start of row 4 which
indicates that this line is in an active call with established audio connection. The
softkeys for Hold and Mute appear.
1
Line 1 [your dial number]
*Fr: [caller ID]
Hold Mute End
When a call is placed on hold, an equal character ( = ) replaces the asterisk ( * ) and the
Rsme softkey displays.
1
Line 1 [your dial number]
=Fr: [caller ID]
Rsme Mute End
When the handset is muted, an x character replaces the asterisk ( * ). Press the Mute
softkey again to restore audio pickup.
1
Line 1 [your dial number]
xFr: [caller ID]
Hold Mute End
Silence the ring
Press the End Call key to silence the loud ring and convert to in-ear ringing. Loud
ringing will resume with the next incoming call received while the handset is in
standby mode.
Placing a second call on the same line
Only outgoing calls are permitted as the second call on a given line. If there is an
incoming call to the number assigned to the line, the caller will get a busy tone and
be routed to voicemail or to the second appearance of that call number if defined.
To access the second call dial tone, press
LINE + [the line number]. Dial the number
to place the second call. When a second call is active on the same line appearance,
the second call appears below the first on the handset display. Use LINE + [the line
number] to toggle between calls. The selected call is in bold type the other call is
faded.