SpectraLink h340 User Manual

Page 22

SpectraLink Corporation

Configuration and Administration—NetLink e340/h340/i640 Wireless Telephone

with SIP

PN: 72-1089-02-D.doc

Page 22

SpectraLink and Cisco Systems have cooperated to implement the Fast Secure
Roaming mechanism. FSR is designed to minimize call interruptions for NetLink
Wireless Telephone users as they roam throughout a facility. Existing Aironet 350,
1100, and 1200 APs may require a firmware upgrade to support FSR. Cisco FSR
requires advanced configuration of the Cisco APs in your site. See your Cisco
representative for detailed documentation on configuring the APs and other required
security services on the wired network. To configure Cisco FSR on a handset, you
must enter a Radius Server username and password into each handset.

Username

Enter a username that matches an entry on the Radius server.

Usernames are alphanumeric strings, and can be entered using the alphanumeric
string entry technique.

Password

Enter the password that corresponds to this Username.

WPA-PSK

The security features of WPA (Wi-Fi Protected Access) using PSK (pre-

shared key) are available and may be used if supported by the APs in the facility.

Select either

Passphrase

and enter a passphrase between eight and 63 characters in

length or

Direct Entry

and enter the 256-bit key code.

WPA2-PSK

The security features of WPA2 (Wi-Fi Protected Access) using PSK are

available and may be used if supported by the APs in the facility. Select either

Passphrase

and enter a passphrase between eight and 63 characters in length or

Direct Entry

and enter the 256-bit key code.

Consult the Configuration Note for the APs installed in your facility for
information on which of the WPA versions are recommended by SpectraLink
engineering. Configure the recommended version on the AP and select the
corresponding option on the Admin menu.

Regulatory Domain

The Regulatory Domain will default to

None

on the handset display. FCC

requirements dictate that the menu for changing the domain be available by

password, which in this case is the

LINE

key. To change the domain, press

LINE

and

then enter the digits that represent the site’s domain. Note that both digits must be
entered.

North America

Europe (except Spain and France); Japan (channels 1-13)

Spain

France

As of this writing, Spain and France are adopting the general European
regulatory rules. Check with your wireless LAN administrator or supplier
regarding which domain to enter in these countries.

Transmit Power

Available Transmit Power is regulated by domain. The Regulatory Domain setting

above affects the options available for this setting. The default setting is

Maximum

which in North America is 100 mW. The Maximum in other domains is 30 mW.
Transmit Power may be set to a lower number if necessary by selecting one of the