SpectraLink h340 - Manual (Page 38)

SpectraLink Corporation Configuration and Administration—NetLink e340/h340/i640 Wireless Telephone
with SIP
PN: 72-1089-02-D.doc Page 38
The following example shows an active incoming call as call one on line 1 (Fr or
From) and an outgoing call on hold as call two on line 1 (To). The bold text on row
4 indicates that call one is the currently selected call and that any softkeys or menu
functions will apply to call one. The asterisk (*) on row 4 indicates that audio is
currently flowing for call one.
1
Line 1 [your dial number]
*Fr: [caller ID of caller]
=To: [number you dialed]
Hold Mute End
Call waiting
If another call comes in on a different line, the called line icon flashes and a tone
sounds in the audio stream. In this example, a call is coming in on line 2 and the line
2 icon is flashing.
1 2
Line 1 [your dial number]
*Fr: [caller ID]
Hold Mute End
To view the caller ID of the incoming call without interrupting the active call, press
LINE + [the line number]. The display now shows information about the incoming
call and you will continue hearing audio on the first call.
1 2
Line 2 [your dial number]
Fr: [caller ID]
Answ Rej
Press Answ or Start Call to answer the incoming call and place the active call on
hold. Pressing the Rej softkey will redirect the incoming call to voicemail or as
otherwise programmed.
Redial
When available, the left ReDl softkey may be pressed to redial the last number called.
Forward
Calls may be forwarded on a per-line basis. To forward calls on a given line, press
LINE + [the line number], press the FWD softkey and enter the forwarding
destination. Press the SAVE softkey to save the forwarding destination. Cancel
forwarding by pressing the FWD softkey again.
The LINE display will indicate if a line is forwarded by a > character followed by the
destination address.
If any line is forwarded, the standby screen will display forwarding status. If the do-
not-disturb feature is enabled, the forwarding status will be pre-empted by the Do
Not Disturb display.