Configuring the voip connection – Siemens Gigaset S450 IP User Manual
Page 79
78
Web configurator
Gigaset S450 IP LBA / SGP / A31008-M1713-Y221-1-7619 / web_server.fm / 30.8.07
Ve
rs
ion 4,
16
.09.
2005
Active
You can use the option in the
Active
col-
umn to activate (
½) and deactivate (Õ)
VoIP connections. If a connection is
deactivated, the phone will not register
for this connection. The connection can
be activated/deactivated by clicking
directly on the option. The change does
not need to be saved.
To configure a connection or to change
the configuration of a connection:
¤
Click on the
Edit
button behind the con-
nection.
This will open a Web page where you can
make the settings needed. Read on:
u
in the section "Configuring the VoIP
u
in the section "Configuring the fixed
network connection" on page 82
Configuring the VoIP connection
Open the Web page:
¤
Open the following Web page:
Settings
¢
Telephony
¢
Connections
.
¤
Click on the
Edit
button behind the VoIP
connection that you want to configure
or whose configuration you want to
change.
This will open a Web page where you can
make the settings that your phone needs
to access your provider's VoIP server.
The Web page always displays the follow-
ing areas:
u
u
Personal Provider Data
u
Call Forwarding
The areas
u
General Provider Data
u
Network
can be shown and hidden by clicking on
the buttons
Show Advanced Settings
and
Hide Advanced Settings
.
You must enter the VoIP provider's general
access data in these areas. You can down-
load the general access data for many VoIP
providers from the Internet (page 82).
¤
Make the settings on the Web page.
¤
Save them in the phone, see page 81.
¤
Active the connection if necessary, see
Area:
IP Connection
Connection Name or Number
Enter a name for the VoIP connection or
the VoIP phone number (max. 16 char-
acters). The connection will be shown
under this name on the handset and in
the Web configurator interface, e.g.
when assigning sending and receiving
numbers (page 85), with call display
Provider
The name of your VoIP provider will be
shown if you have already selected it.
Click on the
Select VoIP Provider
button
to select your provider, and to start
downloading the general data for the
VoIP provider from the Internet if
required. To find out how to do this,
please read "Selecting the VoIP provider
and downloading the VoIP provider
Please note:
– If you click on the
Select VoIP Provider
but-
ton, any changes that have been made to
the Web page will be saved and checked.
Values may need to be corrected before the
Select VoIP Provider
operation is started.
– The downloaded VoIP provider data will be
entered in the areas
General Provider Data
Network
(page 80), so that,
generally speaking, no further settings
need to be made.
If the general data for your VoIP provider is
not available for download, you will need to
make these settings yourself as described
below.