Restoring the base station to factory settings, Resetting the base station via the menu, Activating/deactivating music on hold – Siemens Gigaset S450 IP User Manual
Page 67: Activating/deactivating repeater mode
66
Base station settings
Gigaset S450 IP LBA / SGP / A31008-M1713-Y221-1-7619 / settings_bs_hs_pabx.fm / 30.8.07
Ve
rs
ion 4,
16
.09.
2005
Restoring the base station to
factory settings
Resetting the base station via the
menu
Each individual setting is reset, in particu-
lar:
u
VoIP settings such as VoIP provider and
account data and DTMF settings
u
Settings for the local network (page 69,
u
Default connection (page 67)
u
The names of the handsets (page 58)
u
SMS settings (e.g. SMS centres,
u
Settings for the connection to the PABX
SMS lists and calls list are deleted.
The date and time and the system PIN are
retained. The handsets are still registered.
v
¢
Ð
Settings
¢
Base
¢
Base Reset
~
Enter the system PIN and press
§OK§
.
§Yes§
Press the display key to
confirm.
Resetting the base station using a key
on the base station
As with resetting the base station via the
menu, all individual settings are reset. The
system PIN will also be reset to "0000" and
all handsets registered above and
beyond the delivery scope are deregis-
tered.
¤
Remove the cable connections from
the base station to the router (page 11)
and fixed network (page 11).
¤
Remove the base station mains unit
from the socket (page 11).
¤
Press and hold the registration/paging
¤
Plug the mains unit back into the power
socket.
¤
Press and hold the registration/paging
key (at least 2 sec.).
¤
Release the registration/paging key.
The base station has now been reset.
Activating/deactivating music
on hold
v
¢
Ð
Settings
¢
Base
Music on hold
Select and press
§OK§
to activate
or deactivate music on hold
(
½ = on).
Activating/deactivating
repeater mode
With a repeater you can increase the range
and reception strength of your base sta-
tion. You will need to activate repeater
mode. This will terminate any calls being
made via the base station at that time.
Precondition: a repeater is registered
with the base station.
v
¢
Ð
Settings
¢
Base
¢
Add. Features
Repeater Mode
Select and press
§OK§
(
½ = on).
§Yes§
Press the display key to con-
firm the security prompt.
Please note:
For how to reregister the handsets after reset-
ting, if necessary, see page 56.