Using several handsets, Registering handsets, Registering other handsets on the gigaset sp450 ip – Siemens Gigaset S450 IP User Manual

Page 57

Using several handsets

Gigaset S450 IP LBA / SGP / A31008-M1713-Y221-1-7619 / T-NetBox_SAG-registration.fm / 30.8.07

ion 4,

.09.

2005

Using several handsets

Registering handsets

You can register up to six handsets to your

base station.
You can register your Gigaset S45 handset

on up to four base stations.

Registering another Gigaset S45

handset on the Gigaset SP450 IP

Before you can use your handset, you

must register it to a base station.
You must initiate handset registration on

the handset and on the base station.
If the handset was registered successfully,

the display will show the internal name for

the handset, e.g.

Int 1

. If it does not, repeat

the procedure.
On the handset
v

Settings

Handset

Register H/Set

Enter the system PIN of the

base station (the default is

0000) and press

§OK§

The display shows e.g.

Reg-

str.Procedure

and

Base 2

flash.

On the base station

Within 60 secs. press and hold the reg-

istration/paging key on the base station

(page 1) (min. 1 sec.).

The handset is assigned the lowest unas-

signed internal number (1–6). If several

handsets are registered to the base sta-

tion, the internal number is shown in the

display after registration, e.g.

INT 2

. This

means that the handset has been assigned

the internal number 2.

Registering other handsets on the

Gigaset SP450 IP

You can register other Gigaset handsets

and handsets for other devices with GAP

functionality as follows.

On the handset

Start to register the handset as

described in its user guide.

On the base station

Press and hold the registration/paging

key on the base station (page 1)

(min. 1 sec.).

Please note:

– If there are several handsets registered to

your base station, then you can use one to

make a call via the Internet and the other to

make a call via the Internet or the fixed net-

work at the same time. A maximum of two

internal connections can also be made.

– As a rule, all calls from a registered GAP

handset are dialled via the connection

types (fixed network or VoIP, see page 67)

that have been set up as Default Line. If you

want to establish a connection via the other

connection type, enter a "*" (star) after the

phone number. Example:

049891234567*.

– After registration, all the phone numbers

for the phone will be assigned to the hand-

set as receiving numbers. It will use the

fixed network number and the first VoIP

number as sending numbers. For how to

change the assignments, see page 85.

Please note:

If six handsets are already registered to the

base station, there are two options:
– The handset with the internal number 6 is

in idle status: the handset you wish to reg-

ister is assigned the number 6. The handset

that was previously number 6 is de-regis-

tered.

– The handset with the internal number 6 is

being used: the handset you wish to regis-

ter cannot be registered.

Please note:

You can also make changes on the base station

with a Gigaset C45 handset.