De-registering handsets, Locating a handset ("paging"), Changing the base station – Siemens Gigaset S450 IP User Manual

Page 58: Changing a handset's internal number

Using several handsets

Gigaset S450 IP LBA / SGP / A31008-M1713-Y221-1-7619 / T-NetBox_SAG-registration.fm / 30.8.07

ion 4,

.09.

2005

De-registering handsets

You can de-register any registered handset

from any registered Gigaset S45 handset.
u

Open list of internal users.

The handset you are currently

using is indicated by <

Select the handset to be de-

registered.

§Options§

Press the display key.

De-reg. H/Set No.

Select and press

§OK§

Enter the base station system

PIN (default setting: 0000).

§Yes§

Press the display key to con-

firm the prompt.

Press and hold (idle status).

The handset is de-registered immediately,

even if it is not in idle status.

Locating a handset ("paging")

You can locate your handset using the

base station.

Press the registration/paging key on the

base station (page 1) briefly.

All handsets will ring at the same time

("paging"), even if ringer tones are

switched off.

Ending paging

Press the registration/paging key on the

base station (page 1) briefly.

Press talk key

c on a handset.

Changing the base station

If your handset is registered to more than

one base station, you can set it to a partic-

ular base station or to the base station

that has the best reception (

Best Base

Settings

Handset

Select Base

Select one of the registered

base stations or

Best Base

and

press

§OK§

Changing a handset's internal
number

A handset is automatically assigned the

lowest free number on registration. In the

list of internal subscribers, the handset is

sorted according to its internal number.
You can change the internal number of all

registered handsets (1–6). Numbers 1–6

can only be assigned once each.
u

Open list of handsets. Your

own handset is indicated by

§Options§

Press the display key.

Edit H/Set No.

Select and press

§OK§

. The list of

handsets and their internal

numbers will be displayed.

The internal number for the

first handset flashes.

Select handset.

Enter the new internal number

(1–6). The handset's old

number is overwritten.

q ~

If necessary, select further

handsets and change num-

bers.

After all the changes are completed:

§Save§

Press the display key to save

the input.

a Press

and

hold (idle status).

You will hear the error tone if an internal

number has been allocated twice.

Repeat the procedure with a free

number.