Siemens Gigaset S450 IP - Manual (Page 66)

65
Base station settings
Gigaset S450 IP LBA / SGP / A31008-M1713-Y221-1-7619 / settings_bs_hs_pabx.fm / 30.8.07
Ve
rs
ion 4,
16
.09.
2005
Deactivating the wake-up call/
repeating after a pause (snooze mode)
Precondition: A wake-up call is sounding.
§OFF§ Press the display key. The
wake-up call is deactivated.
or
§Snooze§ Press the display key or any
key. The wake-up call is deacti-
vated and then repeated after
5 minutes. After the second
repetition the wake-up call is
deactivated completely.
Restoring the handset default
settings
Each individual handset setting is reset, in
particular the language, display, volume,
ringer and alarm clock settings (see from
page 61). The last number redial list is
cleared.
v
¢
Ð
¢
Handset
¢
Reset Handset
§Yes§ Press the display key.
You can cancel the restoring
process by pressing a or the
display key §No§ .
a Press and hold (idle status).
Base station settings
The base station settings are carried out
using a registered Gigaset S45 handset.
Protecting against unauthorised
access
Protect the system settings of the base sta-
tion with a PIN known only to yourself.
The system PIN is one of the items you
must enter when registering and deregis-
tering a handset, changing the VoIP set-
tings or restoring to factory settings.
Changing the system PIN
You will have to enter the system PIN e.g.
when you register a handset with the base
station, change the VoIP settings or start
the Web configurator.
You can change the base station's 4-digit
default system PIN ("0000") to a 4-digit
system PIN known only to yourself.
v
¢
Ð Settings
¢
Base
¢
System PIN
~ Enter current system PIN and
press §OK§ .
~ Enter new system PIN.
s Scroll to the Re-enter PIN: line.
~ Now re-enter the new system
PIN and press §OK§ .
For security reasons, "****" is displayed
instead of the system PIN.
a Press
and hold (idle status).