Siemens Gigaset S450 IP - Manual (Page 64)

63
Setting the handset
Gigaset S450 IP LBA / SGP / A31008-M1713-Y221-1-7619 / settings_bs_hs_pabx.fm / 30.8.07
Ve
rs
ion 4,
16
.09.
2005
Adjusting the loudspeaker
volume
You can set the loudspeaker volume for
handsfree talking to five different levels
and the earpiece volume to three different
levels. You can only make these adjust-
ments during a call.
The handsfree volume can only be
adjusted when this function is set.
You are conducting an external call.
t
Open menu.
r Select volume.
§Save§ Press display key if necessary
to save the setting perma-
nently.
If t is assigned with another function:
§Options§ Open menu.
Volume Select and press §OK§ .
Configure setting (see above).
Changing ringer tones
u Volume:
You can choose between five volumes
(1–5; e.g. volume 2 = ˆ) and
the "Crescendo" ring (6; volume
increases with each ring =
‰).
u Ringer tones:
You can choose between 15 different
melodies.
You can set different ringer tones for the
following functions:
u Ext. Calls : for external calls
u Internal Calls : for internal calls
u All : the same ringer tone for all func-
tions
Settings for individual functions
Set the volume and melody depending on
the type of signalling required.
v
¢
Ð Settings
¢
Audio Settings
¢
Ringer Settings
Ext. Calls / Internal Calls
Select and press §OK§ .
¤
Change multiple line input:
r Set volume (1–6).
s Scroll to the next line.
r Select melody.
§Save§ Press the display key to save
the setting.
In idle status, you can also open the menu
Ringer Settings by pressing t briefly.
Same ringer tone for all functions
v
¢
Ð Settings
¢
Audio Settings
¢
Ringer Settings
¢
All
¤
Set volume and ringer tone (see
"Settings for individual functions").
§Yes§ Press the display key to con-
firm the prompt.
a Press and hold (idle status).
Activating/deactivating the ringer tone
You can deactivate the ringer tone on your
handset before you answer a call or when
the handset is in idle status; the ringer
tone can be deactivated permanently or
just for the current call. The ringer tone
cannot be re-activated while an external
call is in progress.
Deactivating the ringer tone permanently
* Press and hold the star key
until the Ú icon appears in the
display.
Re-activating the ringer tone
* Press and hold the star key.