Siemens Gigaset S450 IP - Manual (Page 59)

58
Using several handsets
Gigaset S450 IP LBA / SGP / A31008-M1713-Y221-1-7619 / T-NetBox_SAG-registration.fm / 30.8.07
Ve
rs
ion 4,
16
.09.
2005
Changing the name of a handset
The names " INT 1 ", " INT 2" etc. are assigned
automatically at registration. You can
change these names. The changed name
is displayed in every handset's list.
u
Open list of handsets. Your
own handset is indicated by < .
s Select handset.
§Edit§ Press the display key.
X Delete previous name if neces-
sary.
~ Enter the new name
(max. 10 characters).
§Save§ Press the display key.
a Press and hold (idle status).
Making internal calls
Internal calls to other handsets registered
on the same base station are free.
Calling a specific handset
u Initiate internal call.
~ Enter the number of the hand-
set.
Or:
u
Initiate internal call.
s Select handset.
c Press the talk key.
Calling all handsets ("group call")
u Initiate internal call.
* Press the star key. All handsets
are called.
Ending a call
a Press the end call key.
Transferring a call to another handset
You can forward (connect) an external
call, made via fixed network or VoIP, to
another handset.
u
Open list of handsets.
The external caller hears
music on hold if activated
(page 66).
s Select a handset or Call All and
press §OK§ .
When the internal participant answers:
¤
If necessary announce the external call.
a Press the end call key.
The external call is transferred to the other
handset.
If the internal participant does not answer
or the line is busy, press the display key
§End§ , to return to the external call.
When transferring a call you can also press
the end call key a before the internal
participant lifts the receiver.
Then, if the internal participant does not
answer or the line is busy, the call will
automatically return to you (the display
will show Recall ).
Initiating internal consultation call,
conference call
You are talking to an external participant
(via fixed network or VoIP) and can call an
internal participant at the same time to
hold a consultation call.
u
Open list of handsets.
The external caller hears
music on hold if activated
(page 66).
s Select handset and press §OK§ .
When an internal participant answers you
can speak to them.
You have the following options:
Please note:
If you delete the current handset name and
then press §Save§ without entering a new name,
the handset will automatically be allocated the
standard name "INT x" (x= internal number).