Sanyo QXXAVC922---P - Manual (Page 92)

Chapter 8 Network capture functions
PC4 PC3 PC6
Capture
PC5
PC2 PC1 PJ2 PJ1
* PC provides the Network Capture.
Project a screen
image of PC1 with
PJ2.
* Start capturing of
the PC1 from the
projector PJ2.
[3] Control by the projector
Select "Network" as input mode previously.
1
Select "Network Capture" icon from "Network" menu. Press SELECT button on the projector twice to
display the network capture setting pallet.
2
Select PC number to connect .
3
Select "Connect" and then press SELECT button to start capturing. The screen image of the selected
computer will appear on the projected screen in real time.
4
To end capturing, select "Disconnect" and then press SELECT button.
✐ The IP address of the connecting PC should be registered previously (+ p.89).
✐ If the error message appears, check item "Parameter set up" (+ p.88).
✐ The projector does not provide the function to register the IP address of the computer and to set the
parameter of the capturing. They should be registered by using the web browser previously (+ p.89-90).
Set "On" when
using the wireless
mouse function