Sanyo QXXAVC922---P - Manual (Page 81)

1
Register the projector
To use the multi control function, register the IP address of the projector you intend to control. Click PJ
registration sub menu tab and set the IP address, Memo and Multi control item, then click Set button.
✐ 10 projectors can be registered per page and up to 100 sets can be registered for the multi-control.
IP address
Page no.
Click here to close
the sub menu Check
& Change.
* When you click on a listed IP address,
the login page for the selected pro-
jector will be displayed with a new
window.
Items Description
IP address .................Enter IP address of the projector to control
Memo.........................Enter projector name or installed location etc.
Multi control item
Control ................. Controlling the projector
Both control .............. Controlling and displaying images
Visual control ............ Displaying the images
Status
Confirmation of registered projector
To check the registered information, click Check & Change sub
menu tab. The registered information of the projector is listed as
the below.
* The word "none" is displayed if the "Memo" function is used.
Memo
Multi-control