Sanyo QXXAVC922---P - Manual (Page 135)

1
Firewall setting
If you use Windows XP SP2 or Windows Vista and using Network Capture 4, you may see the Windows
security warning dialog as below. In that case, click "Cancel the block" button on the dialog to enable the
function of Network Capture 4. (This page is described with Windows XP screen the example.)
Even if you select "Block", you can cancel the blocking following to the steps below;
1
Open Control Panel form Start menu and double-click Windows Firewall icon. The firewall setting
window will appear.
2
Select General tab and check that the setting on the firewall setting window as follows;
On (recommended) checked
Don't allow exceptions unchecked
3
Select Exceptions tab and check the name of Network Capture 4 listed on the Programs and Services.
If there is no program name, add the program by clicking Add Program button.
4
Click OK to close setting.
Firewall setting