Samsung ATT_SGH_I727_CELOX_UM_KJ1_WC_102711_F7 - Manual (Page 84)

79
Settings (continued):
Focus mode: allows you to set this option to Auto focus,
Macro, or Face detection. Use Macro mode to take close-
up pictures. Face detection causes the camera to
automatically recognize if there is a face in the shot. It then
optimizes the focus and exposure the face. Use Auto focus
for all others.
Timer: allows you to set a timer for how long to wait
before taking a picture. Options include: Off, 2 sec, 5 sec,
and 10 sec.
Effects: allows you to change the color tone or apply special
effects to the photo. Options include: None, Negative,
Grayscale, and Sepia.
Resolution: allows you to set the image size to either: 8M
(3264x2448), W6.5M (3264x1968), 3.2M (2048x1536),
W2.4M (2048x1232), W0.4M (800x480), or 0.3M
(640x480).
White balance: allows you to set this option to one of the
following choices: Auto, Daylight, Cloudy, Incandescent, or
Fluorescent.
ISO: ISO determines how sensitive the light meter is on your
digital camera. Choose from Auto, 100, 200, 400, or 800.
Use a lower ISO number to make your camera less
sensitive to light, a higher ISO number to take photos with
less light, or Auto to let the camera automatically adjust the
ISO for each of your shots
Metering: allows you to set how the camera measures or
meters the light source: Centre-weighted, Spot, or Matrix.
Anti-Shake: reduces image blur due to the movement of the
subject of the photo or hand movement.
Auto contrast: provides a clear image even under backlight
circumstances where intensity of illumination can vary
excessively.
Guidelines: allows you to turn the guidelines On or Off.
Image quality: allows you to set the image quality to:
Superfine, Fine, or Normal.
GPS tag: allows you to turn GPS On or Off (also known as
Geotagging). The location of where the picture is taken is
attached to the picture. (Only available in Camera mode.)