beautypg.com

Editing an original title (hdd/dvd), Erasing all titles, Erasing by selecting a title (or chapter) – Sharp DV-HR300U User Manual

Page 87: Before starting editing

background image

87

ERASE ALL TITLES

HDD (ORIGINAL)

HDD (PLAY LIST)

SELECT AN ITEM BELOW TO ERASE ALL TITLES

8

2

:

0

AM

SAT 1

5

2

/

2

1

Editing an Original Title (HDD/DVD)

Erasing All Titles

HDD

VR MODE

DVD-RW

VIDEO MODE

DVD-RW

DVD-R

This erases the entire contents of a HDD or
DVD-RW. (Except titles for which title protect
has been set.)

You can erase the following:
HDD (ORIGINAL):

Erases all titles recorded on the HDD.
When originals are erased, play lists are
also erased.

HDD (PLAY LIST):

Erases all play lists created on the HDD.
Even if play lists are erased, the original
titles are not erased.

DVD (ORIGINAL):

Erases all titles recorded on DVD. When
originals are erased, play lists are also
erased.

DVD (PLAY LIST):

Erases all play lists created on DVD. Even if
play lists are erased, the original titles are
not erased.

NOTE

• When a Video mode disc is finalized, you

can no longer erase all titles.

Before Starting Editing

• Switch to the drive (HDD or DVD) to

be edited.

1

Select “EDIT/ERASE” in START
MENU screen, then press SET/
ENTER.

2

Press

' / " to select “ERASE

ALL TITLES”, then press SET/
ENTER.

3

Press

' / " to select what you

want to erase, then press SET/
ENTER.

4

Press

\ / | to select “YES”, then

press SET/ENTER.

• Carefully confirm before executing

erase.

• If you select “NO” and enter, the

screen in step 3 appears.

5

Press SET/ENTER.

• All titles (or play lists) are erased, and

the screen in step 3 appears.
To restore the erased content, press
Green (C) (CNL ERSE). Operate
according to the instructions on the
screen. (Note: You can only undo
once, to the state immediately before
the last erase.)

6

Press EXIT to exit from Edit
mode.

Erasing by Selecting a
Title (or Chapter)

HDD

VR MODE

DVD-RW

VIDEO MODE

DVD-RW

DVD-R

Allows you to select titles to erase, and erase
them in a batch.

When erasing original titles:

If original titles are erased, those titles will
also be erased from play lists.

When erasing play lists:

Even if play lists are erased, the original
titles will not be erased.

NOTE

• Up to a maximum of 20 titles (chapters)

can be selected at one time.

• When a Video mode disc is finalized, you

can no longer select and erase titles.

• You cannot erase chapters in DVD-R/RW

discs (Video mode).

Before Starting Editing

• Switch to the drive (HDD or DVD) to

be edited.

1

Select “EDIT/ERASE” in START
MENU screen, then press SET/
ENTER.

2

Press

' / " to select “ERASE

TITLES”, then press SET/ENTER.

3

Press

' / " / \ / | to select titles

to erase.

• If you press Red (B) (CHAPTER), the

screen will switch to the chapter
thumbnail display so you can select
and erase chapters.

4

Press SET/ENTER.

• If there are other titles (chapters) you

wish to erase, select with

'

'

'

'

' / "

"

"

"

" / \

\

\

\

\ / |

|

|

|

|

and press SET/ENTER.

5

Press Yellow (D) (ERASE).

6

Press

\ / | to select “YES”.

• Once a title (chapter) has been erased,

it cannot be restored. Carefully confirm
before executing erase.

• If you select “NO” and enter, operate

from step 4 again.

7

Press SET/ENTER.

• All selected titles (chapters) are erased.
• To cancel erase, press Green (C)

(CNL ERSE).

• Operate according to the instructions

on the screen.

8

Press EXIT to exit from Edit mode.

NOTE

• A title which is recorded as an overwrite

program will always be shown at the end of
the list.
If there is more than one overwrite
programs, they will be shown in the order
of timer recording. Note that even if you
select “SORT” in the title name list, the
display order will not change.