Sharp DV-HR300U - Manual (Page 115)

115
Finalization
High Speed
Dubbing Prior-
ity
Initialization
Letter Box
LB 4:3
Linear PCM
Sound
MP3
Multi Angle
Multi Audio
Original
Pan Scan
PS 4:3
Parental Con-
trol
Play List
Playback
Control (PBC)
Rate Conver-
sion Dubbing
REC LIST
Region
Number
This is done to enable playback of discs (Video mode) recorded with this Recorder
using other DVD-RW and DVD-R compatible DVD players. (We do not guarantee that
playback will be possible with all DVD players.)
The DVD players which can play back VR mode discs are those with an “
” indica-
tion.
This function lets you perform high speed dubbing to a DVD even in Video mode after
recording, by setting High Speed Dubbing Priority to “YES” when recording to HDD.
This allows you to use the HDD or a DVD-RW disc in this Recorder. If you initialize a
disc, all of the programs recorded on it are erased.
Screen size that cuts off the top and bottom of the image to allow playing of wide-
screen (16:9) software on a connected 4:3 TV.
Linear PCM is a signal recording format used for Audio CDs.
The sound on Audio CDs is recorded at 44.1 kHz with 16 bits. (On DVD discs, sound is
recorded at between 48 kHz with 16 bits and 96 kHz with 24 bits.)
One type of audio compression that uses MPEG1. This format compresses sound to
about 1/10, without impairing the original sound quality.
This is a feature of DVD video discs. In some discs, the same picture is shot from
different angles, and these are stored in a single disc so you can enjoy playback from
different angles. (This function can be enjoyed if the disc is recorded with multiple
angles.)
This is a feature of DVD video discs. This function makes it possible to record multiple
different audio tracks for the same video, so you can enhance your enjoyment by
switching audio. (You can enjoy this function with discs recorded with multiple audio
tracks.)
A video (title) recorded from a TV broadcast or external input is called an “Original”.
Screen size that cuts off the sides of the image to allow playing of wide-screen (16:9)
software on a connected 4:3 TV.
In some digital broadcasts and DVD video discs, a control level for disc viewing is set
depending on the age of the viewer. With this Recorder, you can set the control level for
viewing such broadcasts and discs.
A set of titles created by copying just the needed scenes from original titles is called a
“Play List”. (The original titles remain as are.)
This information is recorded on video CDs (version 2.0). This allows you to actively
select the sections to be viewed or listened to, using a menu displayed on the TV.
This function is used to select the picture quality of dubbed titles at the time of dubbing.
This is a list screen which lets you check the recorded programs (titles) in list form. You
can select either Thumbnail or Title List as the REC LIST.
Number identifying a geographic region of compatibility for a DVD.
Glossary
Continued on Next Page |||