Sharp DV-HR300U - Manual (Page 70)

70
Audio CD/Video CD Playback
VIDEO CD AUDIO CD
Preparation
Press DVD and load a disc.
• The DVD button on the front of the
Recorder lights up.
Playback from the beginning
1
Press |PLAY.
• Playback begins from the first track.
2
To stop playback, press
■STOP/
LIVE.
Playback by selecting the
track
1
1 1 1 1 1 Press DIRECT.
2 2 2 2 2 Select the track number to be
played back using the Number
buttons, then press SET/
ENTER.
• Playback starts from the selected
track.
Example: To select the 12th song
(track), press 1, then 2.
• You can also select the track by
pressing ' ' ' ' ' / " " " " " .
• DIRECT does not work when playing
back a video CD with PBC on.
2
To stop playback, press ■STOP/
LIVE.
Video CD (with PBC)
Playback
• Some video CD discs have Playback
Control (PBC) function which guides the
playback by the menu displayed.
Video CD (with PBC)
If you press
| | | | |PLAY after you load a disc, the
menu displays. The functions of button
changes in the following manner during the
playback operation using the menu.
•
L becomes the “NEXT” button.
• K becomes the “PREVIOUS” button.
Select the track number to be played back
from the menu using the Number buttons and
play back the track.
Example: To select the 5th track, press 0,
then 5.
(Operation method may differ depending on
the disc. Refer to the manual of the video
CD.)
Turning off PBC function when playing
back a PBC compatible video CD
Playback begins from track 1 when
J FWD
is pressed before the menu is displayed after
you load a disc. Playback will follow the track
order like an audio CD.
* If you want to turn the PBC to “ON” when
playing back the CD with PBC off, press
■STOP/LIVE twice and then press | | | | |PLAY
to display the menu.
4
Press ' / " to select the title.
5
Press SET/ENTER.
• Playback of the selected title will
begin.
6
To stop playback, press
■STOP/
LIVE.
NOTE
• If a disc recorded in Video mode has been
finalized (pages 15, 106), a menu screen
will be created automatically to enable
playback with other DVD players. For that
reason, the menu screen is different before
and after finalization.
• If a title was set with another DVD recorder,
and it contains characters which cannot be
displayed with this Recorder, then “****....”
is displayed (up to 64 characters max.).
If there is a timer program which is set to
record on DVD:
• A message to that effect will be displayed 5
minutes prior to the start of the timer
recording. If that happens, stop DVD
playback and load the disc for recording.
• The timer recording will be canceled at the
start time of the timer recording if DVD
playback is still in progress.
Resume playback function
• If you press | | | | |PLAY next, playback will
resume from the point where it stopped the
previous time. To playback from the
beginning, cancel resume mode by
pressing
■STOP/LIVE then press | | | | |PLAY.
(Resume playback will be canceled when
you open the disc tray, turn the power off,
or switch to HDD.)
• Resume playback function does not work
during video CD playback.
DVD Video Playback
DVD VIDEO
1
Press DVD and load a disc.
• The DVD button on the front of the
Recorder lights up.
• Playback may begin automatically,
depending on the disc.
2
Press |PLAY.
• Playback begins from the first title.
• The menu may be displayed first,
depending on the disc. Perform
playback operation by following the
directions on the screen.
• To stop playback, press ■STOP/
LIVE.
DVD/CD Playback