Sharp DV-HR300U - Manual (Page 60)

60
Dubbing (HDD/DVD)
8
1 1 1 1 1 Press ' / " to input start time
(hour), then press SET/ENTER.
2 2 2 2 2 Press ' / " to input start time
(minute), then press SET/ENTER.
9
Press ' / " to set “AUTOMATIC
FINALIZE” to “YES” or “NO” in
case you are dubbing to DVD.
Then press SET/ENTER.
• If you select “YES”, the Recorder will
automatically finalize the disc. The
finalized disc can be played back in
other DVD players.
• For details of finalizing, refer to page
106.
10
1 1 1 1 1 Press \ / | to select “OK” or
“CANCEL”, then press SET/
ENTER.
2 2 2 2 2 Press SET/ENTER at the
confirmation screen.
• Timer Dubbing is set. If you select
“DUB NOW” in step 7, dubbing starts
immediately.
To Stop Dubbing
Press DUBBING
• You can also stop dubbing by
pressing ■STOP/LIVE or REC STOP.
NOTE
• Message will display if timer recording and
timer dubbing overlap. Cancel overlapping
timer recording and set it again.
• If you set “AUTOMATIC FINALIZE” to “YES”
for timer dubbing from HDD to DVD,
finalization may take anywhere from a few
minutes to one hour extra after dubbing.
• A title which is recorded as an overwrite
program will always be shown at the end of
the list.
If there are more than one overwrite
program, they will be shown in the order of
timer recording. Note that even if you
select “SORT” in the title name list, the
display order will not change.
• When timer dubbing from DVD to HDD is
set, taking out the disc will cancel the timer
dubbing.
Canceling Timer Dubbing
• You can cancel timer dubbing by selecting
“TIMER PROGRAM/CHECK” in START
MENU (page 54).
DUBBING HDD ORIGINAL s DVD
IF YOU SET TIMER DUBBING, YOU CAN START
DUBBING AT A SPECIFIED TIME AUTOMATICALLY.
SET STARTING TIME, THEN SET AUTOMATIC FINALIZE (YES/NO)
(ONLY IN CASE OF DVD DUBBING).
OK CANCEL
NO DUB START TIME AUTOMATIC FINALIZE AM
8 2 : 0 AM SAT 1 5 2 / 2 1
00 0 :
SELECTED TIME: 0h 10m DVD REMAN: 2h10m
NOTE
Limitation of Timer Dubbing
• You can only set one timer dubbing at a
time. You cannot set multiple dubbing at
same time.
• You cannot set timer dubbing when you set
32 timer recordings in total (including Easy
Rec Guide, VCR Plus+, Timer Program). In
such case cancel timer recording by
selecting “TIMER PROGRAM/CHECK”
(page 54).
• “EXACT RECORDING” (page 98) will not
work for timer dubbing.
• After setting timer dubbing (dubbing on
standby or in the middle of timer dubbing),
you cannot perform operations such as
erasing, initialization and editing.
• When timer dubbing has been set, you
cannot dub a “Copy Once” enabled
program until the timer dubbing is
completed.
• If any overwrite program is recorded while
timer dubbing for an overwrite program is
on standby, it may not be dubbed properly.
Dubbing Titles Recorded to HDD to
Multiple DVDs
• Operate Edit (page 88) to create Play List
and dub Play List as a unit. (Example:
Dubbing programs more than 6 hours long
like a Christmas special in recording mode
you set.) If the original is dubbed as is
using a recording mode other than “EXACT
DUBBING”, the title will be dubbed
(moved) until the disc is full. (For a “Copy
Once” enabled program, the dubbed part
will be erased automatically from the HDD.)
Take out the dubbed disc and load a new
one to continue dubbing.
• In case you want to divide and dub a
“Copy Once” enabled program to several
discs, stop dubbing manually and reload
the disc.
Front Panel Display during
Dubbing
• PLAY indicator of media of original source
and REC indicator of media to dub light up
during dubbing.
• Front display panel shows dubbing
movement in orange during dubbing.
Example: Dubbing a program from HDD to
DVD.
Dubbing indicator