Sharp DV-HR300U - Manual (Page 63)

63
Eliminating problems (Recording, Timer Recording, Dubbing)
When You Cannot Timer Record
Problem Suggested Solution
• No disc in the Recorder.
• Unrecordable disc is loaded.
• Not enough disc capacity.
• Recorder cannot identify the disc.
• Disc is protected.
• Not enough HDD capacity.
• Number of timer programs set has
reached the limit.
• Dubbing recorded title.
• Playing back the DVD.
• In the middle of direct recording.
• Load recordable DVD.
• Load recordable DVD with enough capacity.
• Cancel disc protection or change to new recordable DVD for
recording.
• Erase recorded programs you don’t want from HDD to create
necessary capacity to record.
• Erase unnecessary timer programs.
• Timer recording does not work during dubbing. Stop dub-
bing before timer recording.
• Stop playing back the DVD more than 3 minutes before timer
recording starts. If you don’t stop playback until timer
recording start time, timer recording will not start.
• Timer recording does not function during direct recording.
Stop direct recording before the preset start time for timer
recording.
When You Cannot Timer Dub
Problem Suggested Solution
• In the middle of recording, timer
recording, HDD playback, or disc
playback.
• Title protection is set to “Copy Once”
enabled title (program).
• Recorded “Copy Once” enabled title
(program) to DVD.
• No DVD in the Recorder.
• Unrecordable disc is loaded.
• Not enough disc capacity.
• Recorder cannot identify the disc.
• Disc is protected.
• Playing back the DVD.
• In the middle of dubbing.
• Timer dubbing does not work during recording, timer record-
ing, HDD playback, and disc playback. Stop recording, timer
recording, HDD playback, and DVD playback before timer
dubbing.
• You cannot timer dub title protected “Copy Once” enabled
title (program).
• “Copy Once” enabled title (program) or title with signal that
prohibits copying recorded to DVD cannot be timer dubbed
to HDD.
• Load recordable DVD.
• Load recordable DVD with enough capacity.
• Cancel disc protection or change to new recordable DVD.
• Stop playing back the disc more than 3 minutes before timer
dubbing starts. If you don’t stop playback until timer dubbing
start time, timer dubbing will not start.
• Timer dubbing does not work during dubbing.
NOTE
• If you set multiple timers, and the programmed times overlap, or the end time of the previous timer is the same as the start
time of the next timer, timer recording will begin after the preceding timer recording finishes. There will be a delay of up to 1
minute before the next timer recording begins.