Sharp DV-HR300U - Manual (Page 46)

46
Timer Recording
7
Confirm the programs on the list
and then press SET/ENTER.
• Timer Setting will be completed and
“TIMER PROGRAM/CHECK” screen
will appear. To continue timer
recording with VCR Plus+, select VCR
Plus+, press SET/ENTER and follow
the same procedure from step 2.
NOTE
Timer Recording from an External Equipment
(e.g. CATV box) using VCR Plus+ System
• Press
\ \ \ \ \ / | | | | | in step 4 to select “AIR/CATV”,
then press ' ' ' ' ' / " " " " " to select “EXT.”. Next,
press \ \ \ \ \ / | | | | | to select “CH”, then press ' ' ' ' ' /
" " " " " to select the input used for external
equipment connection (L1/L2/L3), and then
press SET/ENTER.
To Correct Date in Step 4
• Press
\ \ \ \ \ / | | | | | to select the date, then press
' ' ' ' ' / " " " " " to correct.
To Correct Time in Step 4
• Press
\ \ \ \ \ / | | | | | to select hour or minute, then
press ' ' ' ' ' / " " " " " to correct.
To Set Daily and Weekly Timer Program
• Press Blue (A) or Red (B) in step 4. Each
time you press the button, setting changes
as shown below:
To Change Title Name, etc.
• If you want to change the title name, etc.,
press | | | | | to select “ADVANCED” then press
SET/ENTER. For details refer to page 51.
• A message will be displayed when two or
more timer programs overlap.
• If an error message is displayed, confirm
the PlusCode number and input the correct
number.
• When you set DVD as recording media,
timer recording will not start during disc
playback. If “ALTERNATE RECORDING” is
set to “YES”, the program will be timer
recorded to HDD.
• Timer recording will not start during
dubbing.
• When the power is off while recording timer
is set, front display panel will light up once
timer recording starts. If you want to turn off
the light, set “LCD BACKLIGHT REC.”
(page 104) to “YES”.
You can also turn off the light, by pressing
BACK LIGHT on the remote control (under
the cover) for more than 2 seconds.
Convenient Functions When Recording to
DVD
Exact Recording (page 98)
• If you set EXACT RECORDING to “YES”,
the Recorder will automatically adjust the
recording mode of timer recording so the
recorded programs will fit on one disc.
Alternate Recording (page 104)
• You can record timer programs to HDD
automatically when Exact Recording
cannot fit the programs on one disc.
• Alternate Recording will also function when
you forgot to insert the disc for recording.
To check, change or cancel
timer settings
• See page 54.
To stop recording while
timer recording is in
progress
• If you press REC STOP, “TIMER RE-
CORDING IS IN PROGRESS, IF YOU
PRESS THE REC. STOP BUTTON ONCE
MORE, TIMER RECORDING CANCELS
AND RECORDING STOPS.” will appear
on the screen. Even that message goes
out of the screen, pressing REC STOP
one more time will stop the recording.
DAILY MO-SAT MO-FRI
MONs FRIs SATs SUNs
Blue (A)
(DAILY):
Red (B)
(WEEKLY):