Sharp DV-HR300U - Manual (Page 35)

35
Preparation to Operate This Recorder
1
2
4
3
HDD
VR MODE
DVD-RW
VIDEO MODE
DVD-RW DVD-R DVD VIDEO VIDEO CD AUDIO CD CD-R
MP3
CD-RW
MP3
Buttons on Remote Control
Buttons used for this operation.
Buttons with the same name on the Recorder and
remote control will perform the same operation.
Buttons on Recorder
Turn on the power of TV.
Switch TV input to the AV
input used to connect to the
Recorder.
Press to turn the
Recorder on.
• TV broadcast will be displayed.
Operating HDD
Press .
• The HDD button on the front of the
Recorder lights up, and HDD
operation is enabled.
Operating DVD
Press .
• The DVD button on the front of the
Recorder lights up, and DVD
operation is enabled.
Recording and Playback
• Refer to pages 38 to 77 for details
about recording and playback.
NOTE
• After turning on power, both the HDD and DVD buttons
on the front of the Recorder will blink for a moment while
the Recorder is getting ready. Perform this operation
after the HDD button lights up.