Sharp DV-HR300U - Manual (Page 59)

59
When “MANUAL SETTING (MN)” is
selected:
• Set picture quality with
\ \ \ \ \ / | | | | |, then press
SET/ENTER. (Picture quality can be
selected from 32 levels.)
Selecting Exact Dubbing
• Select Exact Dubbing when there are
multiple titles (up to 5) you want to dub and
you know you cannot fit all into one disc.
The Recorder will select the appropriate
recording mode and fit all titles into one
disc (maximum 6 hours).
• You cannot set recording mode to each
titles when you select exact dubbing.
• You cannot dub titles in higher quality than
the original.
• The Recorder will lower the recording
mode when there is not enough capacity in
the disc to dub compared to the length of
all the titles (programs). Be aware that
original “Copy Once” enabled program will
be erased after dubbing.
5
Press
' / " / \ / | to select the
title to dub, then press SET/
ENTER.
• Setting toggles between “dubbing”
and “dubbing canceled” each time
you press SET/ENTER.
• Select more titles when you want to
dub multiple titles. (You can dub up to
5 titles at once.)
6
Press Yellow (D) (NEXT STEP).
7
Press \ / | to select “DUB NOW”
or “TIMER DUBBING”, then press
SET/ENTER.
• If you have selected “DUB NOW”, go
to step 10- 2.
Dubbing (HDD/DVD)
SELECT THE RECORDING MODE
DUBBING HDD ORIGINAL s DVD
MANUAL SETTING (MN)
EXACT DUBBING
FINE (HIGH QUALITY)
SP (STANDARD)
LP (2X)
EP (3X)
ABLE TO MANUALLY SELECT
1 OF 32 LEVELS.
SELECT QUALITY BASED ON
REMAING DVD CAPACITY.
8 2 : 0 AM SAT 1 5 2 / 2 1
DAILY 9:30 PM ~ 10:00 PM CH 1
TIMER PROGRAM
ABLE TO SELECT 1 OF 32 LEVELS OF PICTURE QUALITY
IN MANUAL REC. MODE BASED ON REMAINING.
EP LP SP FINE
8 2 : 0 AM SAT 1 5 2 / 2 1
1 2
6 5 4
3
TITLE: CH33 FINE
TITLE INFO:
SELECT SET TITLE TO DUB
SELECTED TIME: 0h 10m DVD REMAN: 2h10m
DUBBING HDD ORIGINAL s DVD
5 / 0 1 TUE 0 0 : 0 PM – 1 0 0 : 1 PM 1
8 2 : 0 AM SAT 1 5 2 / 2 1
TITLE LIST CHAPTER NEXT STEP
ENTER
IF YOU SET TIMER DUBBING, YOU CAN START
DUBBING AT A SPECFIED TIME AUTOMATICALLY.
DUB NOW TIMER DUBBING
SELECTED TIME: 0h 10m DVD REMAN: 2h10m
DUBBING HDD ORIGINAL s DVD 8 2 : 0 AM SAT 1 5 2 / 2 1
Continued on Next Page |||
Timer Dubbing/Dubbing
Immediately
(HDD
↔DVD)
High Speed Dubbing
(HDD
→DVD)
HDD
VR MODE
DVD-RW
VIDEO MODE
DVD-RW DVD-R
• You can choose titles and chapters as the
unit to dub.
1
When dubbing from HDD to
DVD
Load a recordable disc onto the
disc tray, then press HDD.
• Load the disc formatted in either VR
mode or Video mode.
• The HDD button on the front of the
Recorder lights up.
When dubbing from DVD to
HDD
Load a disc that recorded the title
you want to dub, then press DVD.
• The DVD button on the front of the
Recorder lights up.
2
Press DUBBING.
• You can select “DUBBING” in Start
Menu to dub.
• Screen of step 4 will display when
you dub from DVD to HDD.
3
Press ' / " to select “HIGH
SPEED DUBBING” or “RATE
CONVERSION DUBBING”, then
press SET/ENTER.
• Screen of step 5 will display when
you select “HIGH SPEED DUBBING”.
Dubbing from HDD to DVD
• When the DVD-R/RW is in Video
mode, if a title has been recorded
with HI SP DUB PRIORITY setting set
to “NO”, then select “RATE CONVER-
SION DUBBING”.
4
Press ' / " to select the record-
ing mode (picture quality), then
press SET/ENTER.
• You cannot select “EXACT DUBBING”
when you dub from DVD to HDD.
Dubbing mark displays to selected titles.
Numbers will be assigned in order of
selection and dubbing will start accord-
ing to the numbers assigned.