Sun Microsystems Sun StorEdge A3500 - Manual (Page 26)

2-10 Sun StorEdge A3500 Hardware Configuration Guide • September 1998
In this configuration:
■ controller module A controls disk arrays 1 and 2 in the 2x7 cabinet and disk
arrays 1 through 3 in 1x8 cabinet (
FIGURE 2-19 )
■ controller module B controls disk arrays 3 through 7 in 2x7 cabinet ( FIGURE 2-20 )
■ controller module C controls disk arrays 4 through 8 in 1x8 cabinet ( FIGURE 2-21 )
2.1.4.3 SCSI Jumper Cables and Terminators
All disk arrays in this configuration should have SCSI jumper cables between the
middle SCSI connectors (IN/OUT-1 and IN/OUT-2) and a differential SCSI
terminator in the far right SCSI connector (IN/OUT-2).