Sun Microsystems Sun StorEdge A3500 User Manual
Storedge, A3500 hardware configuration guide
Table of contents
Document Outline
- Sun™ StorEdge™ A3500 Hardware Configuration Guide
- Contents
- Using UNIX Commands
- Typographic Conventions
- Shell Prompts
- Related Documentation
- Sun Documentation on the Web
- Sun Welcomes Your Comments
- 1.1 Configuration Guidelines
- 1.2 Supported Host Configurations
- 1.3 Ultra 2 Host System—Power Connection Requirement
- FIGURE15 AC Power Sequencers—Ultra 2 Power Connector
- 1. Gain access to the AC power sequencers.
- 2. Route the power cable from the Ultra 2 host under the expansion cabinet frame on the same side...
- 3. Plug the power cord from the Ultra 2 host into the top power connector of either power sequenc...
- 4. Reassemble the expansion cabinet.
- 2
- StorEdge A3500 Configurations
- 2.1 StorEdge D1000 Disk Array Settings
- 2.2 1x2 Cabling
- 2.3 1x5 Cabling
- 2.4 2x7 Cabling
- 2.5 3x15 Cabling