Symmetricom XLi IEEE 1588 - Manual (Page 91)

XLi IEEE 1588 Clock 83
997-01510-03, Rev. C, 12/12/2006
2
5
1
S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S
For example, enter:
F100 IP 206.54.0.21
XLi responds:
OK
RESETING THE UNIT
PLEASE WAIT…
To obtain the IP address of the unit Standard network port, enter:
F100 IP
The XLi responds (example):
F100 IP 206.54.0.21
The three commands, F100 IP, F100 SM, and F100 G, can be concatenated to set all three values
simultaneously. To do so use the following format:
F100IPSMG
Note: The three commands (i.e., IP, SM, G) can be used in any order relative to each other. A colon
separator “:” can be used instead of following IP, SM, and G (e.g., IP:192.168.46.150 )
For example, using appropriate values for your network, enter something similar to:
F100 IP 192.169.46.150 SM:255.255.255.0 G 192.168.46.1
XLi responds:
OK
RESETING THE UNIT
PLEASE WAIT…
F100 SM – Subnet Mask
Note: F100 SM can be used concurrently with F100 IP and F100 G. See the last example provided in
the F100 IP – IP Address section, directly above this one.
Use function F100 SM to display or configure the Subnet Mask. To set the Subnet Mask and restart the
unit, enter:
F100SM