Get ptp protocol settings, Where: for example, enter, Response (one of the following lines) – Symmetricom XLi IEEE 1588 User Manual
Page 137: For example, enter, Response, F131 b4 dhcp enable (or disable), F131 b protocol
XLi IEEE 1588 Clock
129
997-01510-03, Rev. C, 12/12/2006
2
5
1
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
where:
For example, enter:
F131 B4 DHCP ENABLE
(or DISABLE)
Response (one of the following lines):
OK - DHCP enable setting has been received and applied by the PTP Option Card
ERROR - DHCP dynamic setting request has Failed.
ERROR - DHCP dynamic settings has Failed, using Static IP.
Get PTP Protocol settings
To get PTP protocol settings, use the following format:
F131 B
For example, enter:
F131 B4 PROTOCOL
Response:
F131 B4 PROTOCOL 27 ENABLE ENABLE
To set the PTP protocol settings, use the following format:
F131 B
F
= ASCII character F
131
= unit function number
= space
B
= ASCII letter to denote Option Bay number follows
= Option Bay Number, 1 through 4.
DHCP
= specify Dynamic Host Configuration Protocol command
= ENABLE or DISABLE