F18 - software version request, F27 - ftm iii configuration, F42 - multicode output configuration – Symmetricom XLi IEEE 1588 User Manual
Page 61: F44 - n.8 frequency synthesizer, F50 - gps receiver lla/xyz position, F18 – software version request, F27 – ftm iii configuration, F42 – multicode output configuration, F44 – n.8 frequency synthesizer, F50 – gps receiver lla/xyz position
XLi IEEE 1588 Clock
53
997-01510-03, Rev. C, 12/12/2006
2
5
1
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
F18 – Software Version Request
Use function F18 to display the current firmware version numbers of the firmware in the XLi:
•
Bootloader
•
Software (firmware)
•
File System
•
Project Rev #
•
FPGA
Command Line
Use Command Line Function F18 to obtain the system’s firmware version information.For example,
enter:
F18
The XLi responds:
F18 BOOTLOADER 192-8000
SOFTWARE 192-8001
FILE SYSTEM 192-8002v1.80
PROJ REV # 1.80
FPGA # 184-8000V50
F27 – FTM III Configuration
Note: The FTM III card is currently unavailable as an option for the standard XLi IEEE 1588 clock.
F42 – Multicode Output Configuration
Note: The Multicode card is currently unavailable as an option for the standard XLi IEEE 1588 clock.
F44 – N.8 Frequency Synthesizer
Note: The N.8 card is currently unavailable as an option for the standard XLi IEEE 1588 clock.
F50 – GPS Receiver LLA/XYZ Position
Use function F50 to display the current GPS position. Specifically, Use function F50 to: