Set the ip address, Set the subnet mask, Set the default gateway – Symmetricom XLi IEEE 1588 User Manual

Page 132: Request the dhcp settings, Enable/disable dhcp, Request the ptp protocol settings, Request the ptp subdomain name, F131bicbipnnn.nnn.nnn.nnnbsmnnn.nnn.nnn.nnn

124

XLi IEEE 1588 Clock

997-01510-03, Rev. C, 12/12/2006

Request the Internet Configuration (IP Address, Subnet Mask, Default Gateway) settings:

F131BIC

Set the IP Address:

F131BIPnnn.nnn.nnn.nnn

Set the Subnet Mask:

F131BSMnnn.nnn.nnn.nnn

Set the Default Gateway:

F131BGnnn.nnn.nnn.nnn

Request the DHCP settings.

F131BDHCP

Enable/disable DHCP:

F131BDHCPSET

Request the PTP Protocol settings.

F131BPROTOCOL

Enter the PTP Protocol Sync Interval, enable or disable Burst, and enable/disable the Port:

F131BPROTOCOLSIBSPO

Request the PTP Subdomain Name:

F131BSDN

Reset the PTP Parameters to the Factory Default settings:

F131BRFD

Initialize the PTP Protocol to the user-entered settings:

F131BINIT

Request the configuration of the PTP reference clock:

F131BC

Enter the PTP reference clock configuration for the PTP clock Master/Slave and Pri/Sec/Stby:

F131BCMSPSS