Setting the internet configuration, Enable/disable dhcp, Response (one of the following lines) – Symmetricom XLi IEEE 1588 User Manual
Page 136: Response, Response (example), F131 b dhcp, F131 bdhcp
128
XLi IEEE 1588 Clock
997-01510-03, Rev. C, 12/12/2006
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
1
Response (one of the following lines):
OK - The Default Gateway has been received and applied by the PTP Option Card
Setting the Internet Configuration
The three commands, F131 IP, F131 SM, and F131 G, can be concatenated to set all three values
simultaneously. To do so, enter:
F131
nn.nnn>
Note:
The three commands (i.e. IP, SM, G) must be entered in the order of IP, SM and G. A colon sepa-
rator ":" can be used instead of
ture of colon and
For example, using appropriate values for your network, enter something similar to:
F131 B4 IP:192.169.46.150 SM:255.255.255.0 G:192.168.46.1
Response:
OK - The Network Parameters have been received and applied by the PTP Option
Card
The Response messages that the PTP option card can return for the Network Parameters entry include
the OK response previously stated and all the ERROR responses previously stated.
Enable/Disable DHCP
To get the DHCP setting, enter:
F131 B
Response (example):
F131 B4 DHCP ENABLE IP:10.13.0.100 SM:255.255.0.0 G:10.13.0.1
Use the following format to enable or disable DHCP on the PTP card’s network port:
F131 B