Sun Microsystems Sun Adapter IP HL 7 - Manual (Page 74)

TABLE 35 Connectivity Map - Lower Layer Protocol (V3)
Name Description
LLP Type The lower layer protocol (LLP) type. The supported option is MLLP v2.0
(Minimal Lower Layer Protocol v2.0).
For more information on MLLP v2.0, see “Lower Layer Protocol” on page 23 .
Start Block Character The first envelope marker character in the HL7 envelope, as a decimal ASCII
number. Enter a number from 1 to 127. Unless there is a conflict, the value should
be ASCII VT (decimal 11).
End Data Character The second to the last envelope marker character in the HL7 envelope, as a
decimal ASCII number. Enter a number from 1 to 127. Unless there is a conflict,
the value should be ASCII FS (decimal 28).
End Block Character The last envelope marker character in the HL7 envelope, as a decimal ASCII
number. Enter a number from 1 to 127. To strictly comply with the HL7
Standard, this property must be set to a carriage return (decimal 13).
Max Number of Retries The maximum number of times the adapter tries to send a message upon
receiving the MLLP v2.0 Negative Commit Acknowledgement from the peer
before giving up. This property is used by the adapter in outbound mode. Enter
any integer.
Sequence Number Protocol — TCP/IP HL7 V3 Inbound
Adapter
The following table lists and describes the property that appears on the Sequence Number
Protocol page of the Properties Editor accessed from the Connectivity Map. This property
enables or disables HL7 sequence numbering, which is used to help prevent duplication of data.
TABLE 36 Connectivity Map - Sequence Number Protocol (V3)
Name Description
Sequence Number
Enabled An indicator of whether sequence numbering is enabled or disabled. Enabling
sequence numbering helps prevent duplication of data. Select true to enable
sequence numbering; otherwise select false.
HL7v3 Transmission Wrapper — TCP/IP HL7 V3
Inbound Adapter
The following table lists and describes the properties that appear on the HL7 Transmission
Wrapper page of the Properties Editor accessed from the Connectivity Map. The HL7
transmission wrapper includes information a sending application or message handling service
TCP/IP HL7 V3 Adapter Inbound Connectivity Map Properties
Sun Adapter for TCP/IP HL7 User's Guide • October 2009 74