Sharp MD X5 - Manual (Page 7)

6
I
2 "AA" size
batteries
(UM/SUM-3, R6,
HP-7 or similar)
8" - 20'
(0.2m - 6m)
15
Remote sensor
15
DISPLAY
H H H H H
Connecting the AC power cord
I
After connecting the speakers, plug the AC power cord into a conven-
ient AC outlet.
I
Plug the AC power cord into a convenient AC outlet. The letters "ENJOY
MUSIC!" will be scrolled across the display.
I
Unplug the AC power cord from the AC outlet if the unit is not to be used
for a prolonged period of time.
(Continued)
1
2
3
H H H H H
Loading the batteries for the remote control
I
When inserting or removing the batteries, push them towardr the
Ï
battery terminals.
I
Installing the batteries incorrectly may cause the unit to malfunction.
Precautions for battery use:
I
Insert the batteries according to the direction indicated in the battery
compartment.
I
Replace all old batteries with new ones at the same time.
I
Do not mix old and new batteries.
I
Remove the batteries if they are weak or if the unit is not in use for long
periods to prevent potential damage due to battery leakage.
Caution:
Do not use rechargeable batteries (nickel-cadmium battery, etc.)
H H H H H
To change the brightness of the display
Turn the power on, and keep pressing the DISPLAY button for more than
two seconds.
The “DIMMER ON” display will appear, and the display will be dimmer.
To return to the original brightness, keep pressing the DISPLAY
button for more than two seconds.
The “DIMMER OFF” display will appear, and the original brightness is
retrieved.
To an AC outlet
AC 120 V, 60 Hz
Ï
Notes concerning use:
I
Replace the batteries if the control distance decreases or operation
becomes erratic.
I
Periodically clean the transmitter LED on the remote control and the
sensor on the main unit with a soft cloth.
I
Exposing the sensor on the main unit to strong light may interfere with
operation. Change the lighting or the direction of the unit.
I
Keep the remote control away from moisture, excessive heat, shock,
and vibrations.
*01-21 98.6.23, 10:09 AM 6