Sharp MD X5 - Manual (Page 10)

9
H H H H H
Loading and playing CDs
1
Press the CD
H
button.
I
The power will be turned on automatically, and the unit will enter the CD
playback mode.
2
Press the
7
button to open the disc tray.
3
Place the CD on the disc tray, label side up.
I
A CD can be placed on any open position on the disc tray.
I
Be sure to place 3" (8 cm) CDs in the middle of the disc holder.
Caution:
Do not stack CDs in the tray.
This can damage the player and the CDs.
4
Press the
7
button to close the disc tray.
I
The total number of tracks and the total disc playing time will be
displayed.
I
The music schedule will be displayed only for the number of tracks on
the disc.
I
If the CD contains more than 21 tracks, “
Y
” will appear.
5
Press the CD
06
button.
I
Playback will begin from track 1 on the disc you have specified.
I
When all the tracks on the CD have finished playing, the unit will stop
automatically.
To interrupt playback:
Press the CD
06
button.
Press the CD
06
button to resume playback from the same point.
To stop playback:
Press the CD
H
button.
To remove the CDs:
While in the stop mode, press the
7
button.
After use:
Press the POWER button to turn the power off.
Direct playback:
If a CD is loaded in the unit, pressing the CD
06
button turns the power
on and begins playback.
COMPACT DISC OPERATION
Cautions:
I
Do not carry the unit with a disc left in the disc tray. The disc
may come loose inside the unit and be damaged or cause
damage to the unit. This may also cause malfunctions.
I
Do not place two CDs in the disc tray.
I
Do not push the disc tray while it is moving.
I
If the power fails while the drawer is open, wait until the power is
restored before trying to close it.
I
If the disc drawer is stopped forcibly, “ERROR” will appear on the
display and the unit will not function.
If this occurs, turn the power off, and turn it on again.
I
If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
I
If the main unit is subjected to a sharp jolt or it is used where
vibrations are present, sound dropouts may occur. Use the unit in
a stable environment.
If the volume is set to too high, a dropout may occur due to vibrations
from the speakers. If this happens, move the main unit away from
the speakers or turn down the volume.
I
Do not use CDs with loose cellophane tape or stickers or CDs which
have glue left on the surface from tape or stickers. If such a CD is
inserted, you may not be able to remove the CD or the unit may
malfunction.
1
2, 4
5
1
5
3
Total number of tracks Total playing time
Music schedule (More tracks indicator)
*01-21 98.6.23, 10:09 AM 9