Sharp MD X5 - Manual (Page 19)

18
H H H H H
Recording desired tracks from a CD onto a
MiniDisc (Track Editing)
You can record one track or a series of several tracks from a CD onto an
MD.
You can select one track and record it. (If the track numbers are not in
succession, you cannot select a series of tracks.)
1
Press the CD
H
button, and load a compact disc.
2
Load a recordable MiniDisc.
3
Select the track to start recording by the
5
or
4
button.
I
The selected track number appears.
4
Press the TRACK button.
I
To record a single track, skip to step 6.
5
Select the track to end recording by pressing the TRACK button.
6
Press the CD
0
MD button.
I
When all tracks are recorded, recording automatically stops.
If recording does not begin:
When not all of the tracks on a CD can be recorded, the unit will enter the
recording stand-by mode. To record on only those tracks which can be
recorded, press the CD
0
MD button.
To cancel operation:
Before pressing the CD
0
MD button, press the CD
H
or MD
H
button.
To stop recording:
Press the CD
H
button.
After recording the track number, playback and recording will stop.
It is not possible to pause recording.
6
2
1
1
4,5
3
3
4
5
Start track number
End track number Selected tracks
(Continued)
To rerecord:
If you wish to rerecord, you can erase a track that is already recorded,
starting from any point in the old track, to begin a new recording.
Be aware that when you do this, all of the tracks and track names that follow
the newly recorded track will be erased.
1
During playback, press the MD
06
button at the point where you wish
to begin rerecording.
I
The unit will pause.
2 Press the
I
REC button.
I
The "R.ERASE OK?" display will appear.
3
Press the ENTER button.
I
The unit will enter the recording stand-by mode.
4
Select the recording source and start recording.
*01-21 98.6.23, 10:09 AM 18