Sharp MD X5 - Manual (Page 28)

27
ENTERING CHARACTERS
H H H H H
To create names for radio stations that have been
stored in memory
1
Press the TUNER (BAND) button.
2
Select the location number you want to name.
3
Press the NAME/TOC EDIT button.
4
Press the DISPLAY button to select the type of characters you want to
use. (Page 25)
5 Select the character you wish using the
1
/
0
/ ▲ / ▼ buttons.
6
Press the ENTER button to enter the character.
I
Repeat steps 4 to 6 above to enter the characters of the name. When
the next character’s type is the same as the previous character, step 4
can be skipped.
7
After entering all of the characters in the name, press the NAME/TOC
EDIT button.
I
The name will be recorded.
To erase a name:
After performing steps 1 to 3 mentioned above, do the following:
1
Press the TIMER/DELETE button for at least 2 seconds.
I
The "NAME CLEAR?" display will appear.
2
Press the ENTER button.
I
The name will be erased.
Alphabetics
(capital letters)
Alphabetics
(lower-case letters)
Numbers or symbols
© ©
©
H H H H H
To change the message displayed when the
power is turned off
It is possible to change the message displayed on the LCD when the power
is off, to suit your preference.
The default message is "ENJOY MUSIC!".
This can be changed to any other message you choose, up to 20 characters
in length.
1
Press the MESSAGE button.
I
The unit will enter the character input mode.
2
Press the DISPLAY button to select the type of characters you want to
use.(Page 25)
3
Select the character you wish using the
1
/
0
/ ▲ / ▼ buttons.
4 Press the ENTER button to enter the character.
I
Repeat steps 2 to 4 above to enter the characters of the name. When
the next character’s type is the same as the previous character, step 2
can be skipped.
5
After entering all of the characters in the name, press the MESSAGE
button.
I
The message will be recorded.
6
Turn the power off, and check the contents of the programmed mes-
sage.
Alphabetics
(capital letters)
Alphabetics
(lower-case letters)
Numbers or symbols
© ©
©
1
2
3,7
6
4
5
5
5
3
7
1,5
2
3
3
3
4
To erase a programmed message:
1
Press the MESSAGE button.
2 Press the TIMER/DELETE button for at least 2 seconds.
I
The "NAME CLEAR?" display will appear.
3
Press the ENTER button.
I
The programmed message will be erased, and the display will return
to"ENJOY MUSIC!".
Note:
I
You can enter up to 12 characters.
You cannot save a name with more than 12 characters.
Note:
I
When the power is on and you do not make any changes or press
any buttons for at least 5 minutes (while in the CD or MD playback
mode), the message will be displayed.
*22-34 98.6.23, 10:10 AM 27