Sharp MD X5 - Manual (Page 37)

36
(Continued)
To start a recording by yourself (manual recording):
While you are listening to the playback sound from an external unit (tuners,
CDs, etc.), you can start recording by yourself anytime.
1
Load a recordable MiniDisc.
2 Press the AUX button.
I
Select the input that corresponds to the terminals where the external
unit you will record from is connected.
3
Press the
I
REC button.
I
The unit will enter the recording stand-by mode.
I
When you do not want to use the auto mark function, press the A. MARK
button on the remote control.
4
Start playing the music you want to record on the external unit.
5
Adjust the recording level using the INPUT LEVEL control.
(This is only necessary when recording from analog inputs.)
I
The maximum level should not exceed "0 dB".
I
In the case of digital inputs, it is not necessary to adjust the recording
level.
6
Press the MD
06 06 06 06 06
button.
To stop recording:
Press the MD ■ button.
1
2
3
5
6
H
2
3
6
H
3
5
0dB
*35-40 98.6.23, 10:11 AM 36