Sharp MD X5 - Manual (Page 31)

30
H H H H H
Timer recording
Before timer recording, the following preparations are required.
I
Make sure that the clock setting is correct. (Page 8)
I
Load a recordable MD.
I
Preset the radio station. (Page 12)
Programming for timer recording:
1
While in the stop mode, press the TIMER/DELETE button, and then the
▲ or ▼ button so that the TIMER SET display appears.
2
Within 10 seconds, press the ENTER button, and then select the timer
mode using the
▲ or ▼ button.
3
Press the ENTER button.
I
The start time setting display will appear.
4 Enter the hour for the start time using the
1
or
0
button. Then, press
the ENTER button.
5 Enter the minute using the
1
or
0
button. Then, press the ENTER
button.
I
The stop time setting display will appear.
I
The display time will increase by one hour automatically.
6 Enter the hour for the stop time using the
1
or
0
button. Then, press
the ENTER button.
7 Enter the minute using the
1
or
0
button. Then, press the ENTER
button.
I
The start and stop times are now set.
8
Select the source program using the
1
or
0
button.
I
The source is selected in the following sequence:
TUNER → AUX → DIGITAL1 → DIGITAL2 → PHONO
I
If TUNER is selected, press the ENTER button, and then select the
preset number using the
1
or
0
button.
9
Press the ENTER button.
10
Adjust the volume level using the
1
or
0
button.
11
Press the ENTER button.
I
Timer recording setting is complete.
Note:
I
If you do not perform the next operation within 10 seconds, the operation
will be canceled. If this happens, try the operation agein from the
beginning.
Setting timer recording:
1
Press the TIMER/DELETE button.
I
Press the ▲ or ▼ button so that the T-STANDBY display appears.
2
Press the ENTER button.
I
The settings will appear in order, and the unit will enter the timer
recording standby mode. (If the power is on, the unit will be turned off.)
3
When the timer recording start time is reached, the power will be turned
on to start recording.
When the timer recording stop time is reached, the power will be turned
off automatically.
→
ENTER
TIMER/
DELETE
1
2
3
4
5
6
7
8
9
1
2
(Continued)
Notes:
I
You cannot make a timer recording using CDs.
I
The timer recording with this unit cannot be used to control
equipment connected to this unit. You must use the timer of the
other equipment, if it has one.
I
The timer playback and timer recording functions cannot be used
at the same time.
In the following cases, the timer recording function will not work.
I
When a MiniDisc has not been inserted.
I
When a playback-only MiniDisc is inserted.
I
When the MiniDisc you inserted is protected against accidental
erasure.
I
When there is no recording space left on the MiniDisc you have
inserted .(when the "TOC FULL" or "DISC FULL" messages ap-
pear)
*22-34 98.6.23, 10:11 AM 30