Sharp MD X5 - Manual (Page 25)

24
H H H H H
Erase
To erase tracks one at a time:
1
While in the stop mode, select the track to be erased using the
5
or
4
button.
I
Start playing the track you wish to erase, and press the MD
06
button.
2
Press the NAME/TOC EDIT button, and then select “ERASE” using the
▲ or ▼ button.
3
Within 10 seconds, press the ENTER button.
I
To cancel the operation, press the MD
H
button.
4
Press the ENTER button again.
I
The track is erased, and the unit is stopped at the beginning of the
previous track.
I
When a track is erased, the numbers assigned to the tracks following
the erased track will be automatically decreased by one.
Notes:
I
Once a track has been erased, it cannot be recovered. Double-check
the track number before erasing it.
I
When a track is erased, the track name will be erased at the same time.
To erase all of the tracks at once:
1
Press the MD
H
button.
I
The total number of tracks and the total playing time for the MD will be
displayed.
2
Press the NAME/TOC EDIT button, and then select “ALL ERASE” using
the
▲ or ▼ button.
3
Within 10 seconds, press the ENTER button.
I
To cancel the operation, press the MD
H
button.
4
Press the ENTER button again.
I
All of the track numbers and track names will be erased.
(Continued)
1
2
3,4 2
1
2
3
4
1
3,4
2
1
2
3
4
*22-34 98.6.23, 10:10 AM 24